12in Siser Vernice HTV 1 Yard (12in x Yard)

Siser Vernice Heat Transfer Vinyl (HTV)

If you are looking for something sleek rather than subtle, Vernice is the HTV for you!

This ultra-glossy HTV makes its return to give your designs an incredibly polished appearance. Vernice adds eye-catching visual interest to your garments. 

• top layer only
• laser friendly
• can be pressed with home iron

For Use On: 100%Cotton | Poly/cotton blends | 100%Polyester 

Cut Instructions:

·         Put shiny side down

(not sure which side is vinyl and which is the mask/clear carrier? Use your weeder to pick at a corner. If it stretches, that’s vinyl. If it doesn’t stretch, that’s the mask/clear carrier)

·         Mirror your image

·         For suggested cut settings, check out à  Siser Suggested Cutter Settings

Application Instructions:

Heat Press:

• Preheat garment for 2-3 seconds.

• Use a heat transfer cover sheet or multipurpose paper

• Apply design at 305°F / 150°C

(EasyPress® users add approx. 30°).

 • Use medium pressure for 15 seconds.

• Peel carrier cold.

Home Iron:

• Set iron dial between Cotton and Linen.

• Cover design with Heat Transfer Cover Sheet or Multipurpose Paper.

• Place on flat, hard surface (ironing board not recommended).

• Press each section of design with iron with medium/firm pressure (do not slide) for 15 seconds.

• Peel carrier cold.

Laundering:

• Wait 24 hours before first wash.

• Turn inside out

• Machine wash cold with mild detergent.

• DO NOT bleach, dry clean, or use liquid fabric softener.

• HANG DRY ONLY!!

• Wash inside out for best results.